Custom CNC Collet Chuck 25 Type Auto Lathe Round Stock
OpeningWe machine your 25 type collet to your drawing, not from a catalog. Every dimension is verified before shipment. You send the print; we handle the rest.At a glance: Tolerance ±0.005 mm on bore
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine your 25 type collet to your drawing, not from a catalog. Every dimension is verified before shipment. You send the print; we handle the rest.
At a glance: Tolerance ±0.005 mm on bore and taper, lead time 7–10 working days, no MOQ. One piece or one thousand, same process.
This is a precision manufacturing part for auto lathes running round bar stock. It is not a stock item. It is made to fit your spindle nose, your bar diameter, and your material.
Specifications
Parameter
Value
Material options
20CrMnTi, 40Cr, 65Mn, or per your drawing
Hardening
Carburized to HRC 58–62, case depth 0.8–1.2 mm
Bore tolerance
±0.005 mm (round bar grip range)
Taper angle tolerance
±0.002° (per AT3 or better)
Slit width
0.3–0.5 mm, EDM wire cut, no burr
Surface finish
Ra 0.4 µm on bore and taper, Ra 0.8 µm elsewhere
Machining process
CNC turning, internal grinding, EDM slotting
Inspection
100% dimensional check, taper gauge test per batch
Batch size
1–10,000 pcs, no MOQ
Lead time
7–10 working days for standard sizes, 15 days for complex prints
Country of origin
Made in China, Dongguan factory
We use CNC lathes for the outer profile, then internal grinders for the bore and taper. Slits are cut by wire EDM to avoid deformation. Hardening is done in vacuum furnaces to keep distortion under 0.02 mm.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each batch gets a heat number and a job number. If you have a problem in six months, we can trace the steel, the heat treatment, and the operator. No guesswork.
2. Inspection report per batch. You get a dimensional report with every shipment. It lists bore diameter, taper angle, hardness, and surface finish. You do not have to re-measure everything on arrival. We do it before packing.
3. One factory for CNC + stamping + springs + heat sink. Your collet chuck is not the only part you need. If your assembly also needs a spring, a stamped bracket, or a heat sink, we machine the collet and make the other parts under one roof. One PO, one quality standard, one shipping date.
Where these parts are used
Our custom CNC collet chuck is used in auto lathes (Swiss type and sliding headstock) for holding round bar stock. Typical applications:
Medical device manufacturing: Holding stainless steel bar for bone screws and surgical pins. Bore tolerance matters because the part wall is thin.
Electronics connectors: Machining brass or copper bars for pin terminals. The collet must grip without marking the surface finish.
Automotive fuel injectors: Round bar stock for nozzle bodies. Taper accuracy keeps runout under 0.01 mm.
Fastener production: High-volume screw and bolt blanks. Hardened collets last longer between regrinds.
Watch and instrument parts: Small diameters, 1–5 mm bar. Slit geometry must be consistent to avoid bar pushback.
If you run round bar on an auto lathe, you are a potential user. The collet is the interface between your spindle and your material. It is not the place to save money.
Q: Is there a minimum order quantity?
A: No. We make one piece for prototypes and thousands for production. The unit price drops with quantity, but the setup quality is identical.
Q: What tolerance can you hold on the bore and taper?
A: We hold ±0.005 mm on the bore and ±0.002° on the taper angle. We verify with a calibrated taper gauge and air gauge. If your drawing is tighter, send it. We will tell you if it is feasible before quoting.
Q: What is your typical lead time?
A: 7–10 working days for standard 25 type collets. Complex prints with special hardening or exotic materials take 15 days. We ship by DHL or FedEx, door to door.
Q: Do you provide material certificates?
A: Yes. We provide mill certificates for the steel, heat treatment reports, and a full dimensional inspection report. All are included free with your shipment.
Send your drawing
Send us your 25 type collet drawing. We will quote firm within 12 hours. No vague estimates, no hidden costs.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China, with 20 years in CNC machining. We make custom CNC collet chucks with no MOQ, and we verify every part before it ships. Your drawing is the starting point. Send it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.