Custom CNC Collet Chuck 25 Type Hex Bore Spring Collet | BQUQ
OpeningYour drawing defines the part. We machine it.This is a 25-type hex bore spring collet for auto lathes and CNC collet chucks. We make it to your exact dimensions, from your material choice, with
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
This is a 25-type hex bore spring collet for auto lathes and CNC collet chucks. We make it to your exact dimensions, from your material choice, with your tolerance stack. Every piece is verified before shipment. No exceptions.
Tolerance: ±0.005 mm on bore and hex geometry
Lead time: 7–12 days for prototypes, 15–20 days for production runs
No MOQ: order one piece or ten thousand
Inspection report included with every batch
We are a precision manufacturing factory in Dongguan, China. Twenty years of CNC machining, stamping, springs, and heat sinks under one roof. You send the drawing. We return a part that fits your chuck and holds your workpiece.
Specifications
Parameter
Value
Type
25-type spring collet, hex bore
Bore shape
Hexagonal, custom per drawing
Bore size range
3 mm – 25 mm (hex across flats)
Outer diameter
25.4 mm (standard 25-type)
Length
60 mm – 80 mm, per drawing
Material options
65Mn spring steel, 60Si2Mn, 9Cr18 stainless, or customer-specified
Hardness
45–52 HRC after heat treatment
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on OD
Tolerance
±0.005 mm on bore, ±0.01 mm on length
Heat treatment
Quenched and tempered, optional nitriding
Keyway/slot
Precision wire-cut, width ±0.02 mm
Inspection
100% dimensional check, batch report
Batch size
1 – 100,000 pieces
Lead time
7 days for 1–50 pcs, 15 days for larger runs
We use CNC turning and grinding for the OD and bore, then wire-cut the slots. The hex bore is broached or wire-cut depending on size and tolerance. Every collet is stress-relieved after machining to prevent distortion during use.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Each batch gets a unique number. We record material heat number, machine used, operator, and inspection results. If a problem appears in your production, we trace it back to the exact melt and shift. No guesswork.
2. Inspection report per batch
You receive a dimensional report with every shipment. It lists bore size, hex geometry, OD, length, hardness, and surface finish. Measured values, not nominal values. Your QC team can verify against our numbers in minutes.
3. One factory for CNC + stamping + springs + heat sinks
Your collet chuck might need a stamped retainer, a spring, or a heat sink in the same assembly. We make all of them. One purchase order, one quality system, one shipping point. Fewer suppliers, fewer delays, fewer arguments about who is responsible.
Where these parts are used
The 25-type hex bore spring collet is common in automatic lathes and CNC collet chucks. Typical applications:
Swiss-type lathes – holding hex bar stock for screw machine parts
CNC turning centers – gripping hex blanks for milling or drilling operations
Secondary operations – holding hex parts for thread rolling, knurling, or cross-drilling
Fastener industry – hex bolts and nuts requiring precise angular orientation
Medical device machining – small hex implants and surgical instruments
The hex bore locks the workpiece orientation. No slippage, no rotation, no re-indexing. That is why buyers specify a custom hex collet instead of a round bore with a set screw.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your fit test, or a thousand pieces for production. The unit price drops with quantity, but we do not force you to over-order.
Q: How do you guarantee tolerance and quality?
A: We machine to ±0.005 mm on the bore and hex. Every collet is measured with a CMM or bore gauge. The batch report shows actual values. If anything is out of spec, we replace it at no cost.
Q: What is your lead time?
A: Prototypes ship in 7–12 days. Production runs of 100+ pieces ship in 15–20 days. For urgent orders, we can expedite to 5 days for a small surcharge.
Q: Do you provide material certificates?
A: Yes. We supply mill certificates for the raw material, heat treatment reports, and hardness test results. All documents are in English and traceable to the batch number.
Send your drawing
Send us your PDF or STEP file. We will check the geometry, confirm the material, and give you a firm quote within 12 hours. No obligation, no hidden costs.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Custom CNC collet chuck, made in China, with no MOQ and verified quality. Your drawing is the starting point. We handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.