Precision CNC Collet Chuck 25 Type Quenched Bore Custom Made in China
OpeningYour drawing becomes a finished collet in days, not weeks. We machine it, quench it, and grind the bore to your exact print. Every unit is verified before shipment. No exceptions.Tolerance: 0.0
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing becomes a finished collet in days, not weeks. We machine it, quench it, and grind the bore to your exact print. Every unit is verified before shipment. No exceptions.
Tolerance: 0.005 mm on bore ID
Hardness: HRC 58–62 after quenching
Lead time: 7–10 working days for standard sizes
No MOQ – order 1 piece or 1,000 pieces
This is a 25 type round bore collet, quenched for wear resistance. It fits standard auto lathe spindles. We make it from your drawing, not from a catalog.
We use CNC lathes for the blank, then quench in a vacuum furnace to avoid decarburization. Final bore grinding is done on a jig grinder with a 0.005 mm resolution. Slots are cut after hardening to prevent distortion.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every heat number and batch is recorded. If you need to trace a part back to its material lot, we can do that in minutes. We keep records for 5 years.
2. Inspection report per batch. You get a dimensional report with every shipment. Bore ID, OD, hardness, and slot width are all measured and documented. No surprises at your incoming QC.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck is not the only part you buy. We also make springs, stampings, and heatsinks under one roof. Fewer suppliers, fewer emails, one quality standard.
Where these parts are used
A 25 type round bore collet is a workhorse in high-volume turning. You will find it in:
Auto lathes for watch and clock parts – pinions, gears, balance staffs. The quenched bore holds tight tolerance over thousands of cycles.
Medical device manufacturing – small bone screws, dental implant posts. The 0.005 mm bore repeatability keeps thread cutting consistent.
Electronic connector pins – brass and beryllium copper pins, 1–5 mm diameter. The collet grips without marking the surface.
Fastener production – screw blanks and rivets. Quenched steel resists wear from abrasive materials like stainless steel.
Automotive fuel injector components – needle valves and nozzles. The bore finish prevents micro-scratches that cause leakage.
In all these cases, the collet is the last thing between the raw bar and the finished part. If it fails, you scrap the whole batch. That is why we quench and grind, not just turn and ship.
Q: What is your MOQ?
A: No MOQ. We make one piece for prototypes and scale to 10,000 pieces without changing the process. You pay a small setup fee for single units, but the per-piece price drops sharply at 100+ pieces.
Q: How do you guarantee 0.005 mm tolerance after quenching?
A: We grind the bore after heat treatment, not before. The blank is turned with 0.2 mm stock left on the bore. After quenching, we grind to final size. This removes distortion from the heat treat step. Each bore is checked with an air gauge.
Q: What is your typical lead time?
A: 7 working days for prototypes, 15 working days for production batches. If you need a rush, we can do 5 days for standard materials like 65Mn. We do not quote faster than we can deliver.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw material and our own heat treat report showing the quench temperature and hardness curve. Both are included free with every order.
Send your drawing
Send us your PDF, STEP, or even a hand sketch. We will reply with a firm quote in 12 hours. No vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Tell us the bore size, material, and annual quantity. We will confirm the tolerance and lead time before you commit. Precision manufacturing is our only business. Your custom CNC collet chuck is made in China, but the quality is checked to international standards. No MOQ, no minimum order hassle. Just send the drawing.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.