Custom CNC Collet Chuck 36 Type Hex Bore Auto Lathe Parts
Your drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact dimensions, verified on our CMM before shipment. No guesswork. No tolerance drift.Toleran
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact dimensions, verified on our CMM before shipment. No guesswork. No tolerance drift.
Tolerance: ±0.005 mm on bore and hex geometry
Lead time: 15–20 days for standard batches
No MOQ — order 1 piece or 10,000
Material certs: EN 10204 3.1 included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years on CNC lines. Auto lathe collet chucks are our daily work. Send a drawing. Get a part that fits your spindle the first time.
15 days for prototypes, 20 days for production runs
Country of origin
Made in China, Dongguan factory
Every collet chuck is machined from solid bar stock. We do not use castings or blanks. This gives you consistent grain structure and predictable hardness. The hex bore is cut with wire EDM after heat treatment, so the profile stays sharp and the tolerance holds under repeated clamping.
T
hree reasons buyers send us their drawings 1. Batch-traceable quality. Each batch gets a unique heat number and work order. Material certs, heat treatment records, and inspection data are all linked to that number. If a problem shows up on your line, we trace it in minutes, not days.
2. Inspection report per batch. You get a full dimensional report with every shipment. CMM data, hardness readings, surface roughness values. No sampling. We measure 100% of critical dimensions on every piece.
3. One factory for CNC + stamping + springs + heat sinks. Your collet chuck is not the only part you buy. We also run metal stamping, spring winding, and heat sink lines. Combine your orders in one shipment. One supplier, one invoice, one quality standard. This cuts your logistics cost and your vendor management time.
W
here these parts are used Custom CNC collet chucks with hex bores are for automatic lathes that feed hex bar stock. Typical applications:
Fastener production — clamping hex blanks for screws, bolts, and nuts on multi-spindle autos.
Hydraulic fittings — machining hex ends on brass and steel fittings without secondary milling.
Electrical connectors — precision hex bores for terminal pins and contact parts in relay housings.
Automotive components — fuel injector bodies, brake valve stems, and sensor housings that need hex drive features.
Medical devices — small hex drivers and bone screw blanks, where surface finish and tolerance are critical.
The 36 type chuck fits standard auto lathe spindles (e.g., Citizen, Star, Tsugami, and domestic Chinese machines). If your spindle is non-standard, we adjust the OD and taper to match. You send the drawing. We make it fit.
Q
uestions buyers ask before ordering Q: What is your MOQ? A: No MOQ. We make one prototype for your approval, then scale to your production volume. Tooling is set up per order, so small batches do not carry extra cost.
Q: How do you guarantee tolerance and quality? A: We machine to ±0.005 mm on the bore. After heat treatment, we grind the bore and OD. Every part is checked on a CMM. The inspection report is included with your shipment. If any part is out of spec, we replace it at no cost.
Q: What is your lead time? A: Prototypes ship in 15 days. Production orders ship in 20 days, depending on quantity and material availability. For urgent orders, we can split the batch and ship the first pieces in 7 days.
Q: Can you provide material certificates? A: Yes. Every batch comes with EN 10204 3.1 material certs, heat treatment reports, and hardness test data. We can also provide third-party inspection (SGS, TUV) at your request.
S
end your drawing Send us your drawing or a sample part. We will quote firm within 12 hours. No hidden costs. No vague promises.
Email: sc@bquq.com WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your custom CNC collet chuck, verified before shipment.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.