OpeningThis is a 36-type extended collet with a square bore, machined to your exact drawing. We do not stock generic blanks and modify them. We start from raw bar stock and cut every feature—bore shap
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
This is a 36-type extended collet with a square bore, machined to your exact drawing. We do not stock generic blanks and modify them. We start from raw bar stock and cut every feature—bore shape, taper angle, slot width, and reliefs—according to your print.
Every collet is verified before shipment. We check the taper with a gauge, the square bore with a pin, and the slot geometry with optical measurement. If it does not match your drawing, it does not ship.
At a glance: Tolerance ±0.005 mm on bore and taper, lead time 7–12 working days, no MOQ, material certs included.
Specifications
Parameter
Value
Material options
20CrMnTi, 40Cr, 65Mn, 9SiCr, or customer-specified alloy steel
Hardness
58–62 HRC (through-hardened) or 58–62 HRC case-hardened on request
7 working days for prototypes, 12 working days for production
Country of origin
Made in China, Dongguan factory
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Every heat lot is assigned a unique code. We record material certs, heat treatment curves, and final inspection data against that code. If a problem appears in your assembly line six months from now, we can pull the full production record for that batch within one hour. No guesswork.
2. Inspection report per batch.
You get a dimensional report for every batch, not just a sampling. We measure bore size, taper angle, concentricity, and hardness on each piece. The report is signed by our QC engineer and sent with the shipment. Your incoming inspection takes minutes, not hours.
3. One factory for CNC, stamping, springs, and heat sinks.
We run four production lines under one roof: CNC machining, metal stamping, springs, and heat sinks. If your collet chuck assembly also needs a stamped retainer, a compression spring, or a heat sink for the drive unit, you send one drawing package and deal with one quality team. Fewer suppliers, fewer interfaces, fewer delays.
Where These Parts Are Used
The 36-type extended collet with a square bore is a workholding component for automatic lathes and CNC Swiss-type machines. The square bore grips square or hex stock without marring the corners, and the extended length reaches deeper into the spindle for longer bar feed-out.
Typical applications include:
Automatic screw machines producing square-head bolts, nuts, and fasteners.
CNC Swiss lathes machining square or hex bar stock for medical implants, dental components, and precision shafts.
Multi-spindle automatics where quick collet change and high gripping repeatability are required.
Secondary operations on pre-formed square parts, such as broaching, milling, or drilling, where the part must be held rigidly without distortion.
In all these cases, the collet is the last mechanical link between the spindle and the workpiece. If it does not grip true, nothing downstream is true.
Q: What is your MOQ?
A: No MOQ. We machine one piece for prototyping or 10,000 pieces for production. The unit price drops with quantity, but we do not force you to buy more than you need.
Q: What tolerance can you hold on the square bore and taper?
A: Standard is ±0.005 mm on bore and ±0.01° on taper angle. For special applications, we can hold ±0.003 mm on the bore and ±0.005° on the taper, but this requires a material that does not move during heat treatment. We will tell you if your drawing is not achievable before we quote.
Q: What is your lead time for a custom CNC collet chuck?
A: 7 working days for a prototype or small batch. 12 working days for production quantities. If you need it faster, we can split the batch and ship the first part of the order early. We do not quote lead times we cannot meet.
Q: Do you provide material certificates and heat treatment reports?
A: Yes. Every shipment includes a mill certificate for the raw material and a heat treatment report showing the hardness and case depth. If you need a full PPAP or a third-party inspection, we can arrange that at cost.
Send Your Drawing
Send us your drawing for a firm quote. We reply within 12 hours with pricing, lead time, and a technical review of your print. If we see a potential issue with the bore tolerance or the material, we tell you before you order.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your drawing, our machines, verified before shipment.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.