Custom CNC Collet Chuck 38 Type Square Bar Stock Made in China
OpeningYour drawing defines the part. We machine it exactly to that specification. Every collet is verified before shipment. No guesswork, no deviation.This is a 38 type collet chuck for square bar st
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it exactly to that specification. Every collet is verified before shipment. No guesswork, no deviation.
This is a 38 type collet chuck for square bar stock. It grips 4-sided material firmly for auto lathe operations. We make it from your print, in your material, with your tolerances.
Tolerance: ±0.005 mm on bore and slot widths
Lead time: 7-12 working days for standard batches
No MOQ: order 1 piece or 1,000 pieces
Material: 20CrMnTi or 65Mn steel, case-hardened to 58-62 HRC
Inspection report included with every batch
Specifications
Parameter
Value
Type
38 type collet, for square bar stock
Bar stock size
6 mm to 38 mm square (custom per drawing)
Material options
20CrMnTi, 65Mn, 9SiCr, or customer-specified alloy steel
Hardness
58-62 HRC case-hardened, core 30-35 HRC
Tolerance
Slot width ±0.005 mm, bore concentricity ≤0.01 mm
Surface finish
Ra 0.4 μm on gripping surfaces, Ra 0.8 μm elsewhere
We run these on our own CNC lathes and machining centers. Slotting is done with wire EDM for repeatable accuracy. Grinding is done in-house on cylindrical and surface grinders. Heat treatment is subcontracted to a certified partner, but we verify hardness on every batch.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique job number. We record material heat number, machine operator, inspection results, and heat treatment data. If a problem appears in your line, we trace it back to the exact batch and date. No mystery parts.
2. Inspection report per batch.
You get a full dimensional report with every shipment. We measure bore diameter, slot width, concentricity, hardness, and surface finish. The report shows actual measured values, not just a pass/fail stamp. Your QC team can trust it.
3. One factory for CNC, stamping, springs, and heat sinks.
BQUQ runs four production lines under one roof. If your collet needs a spring-loaded pusher, a stamped retainer, or a heat sink for the spindle, we make it all. One purchase order, one shipping point, one quality standard. This cuts your supplier management time in half.
Where these parts are used
This 38 type collet is standard on Swiss-type auto lathes and CNC sliding headstock machines. It grips square bar for parts like:
Square drive shafts for small motors and pumps
Hex and square fasteners machined from bar stock
Precision square blanks for watch components
Electrical connector pins with square cross-sections
Small square tool holders for automatic tool changers
Square brass or steel stock for valve components
The collet's job is to hold the bar rigidly without marking the surface. Our hardened and ground gripping surfaces do exactly that. You get consistent feed-out and repeatable part length, even at 8,000 RPM spindle speeds.
Q: Is there really no MOQ?
A: Correct. We make 1 piece for prototype validation or 5,000 pieces for production. The unit price drops with quantity, but the quality standard is identical. Many buyers start with 2-3 test pieces to verify fit on their machine.
Q: How do you guarantee tolerance and quality?
A: We use CNC machines with ±0.002 mm positioning accuracy. Wire EDM holds slot width to ±0.005 mm. Every collet is measured on a CMM or with calibrated micrometers. We send the inspection report with the shipment. If anything is out of spec, we replace it at no cost.
Q: What is your typical lead time?
A: Prototypes (1-5 pieces) ship in 7 working days. Production batches (50-500 pieces) ship in 10-12 working days. Larger orders may take 15 days. We confirm exact lead time when you send the drawing.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw steel, heat treatment records, and hardness test reports. If you need full traceability to the heat number, we include that in the batch documentation.
Send your drawing
Send us your 2D drawing or 3D model. We will review the geometry, material, and tolerance. You get a firm quote within 12 hours. No hidden costs, no vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China, with 20 years of experience. Your custom CNC collet chuck is made in China, but the quality is verified to international standards. Send your drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.