Custom CNC Collet Chuck Auto Lathe 46 Type Round Bar Stock
OpeningYour drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact print, then verified on a CMM before shipment. No guesswork, no deviations.Tolerance: ±0.005 mm
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact print, then verified on a CMM before shipment. No guesswork, no deviations.
Tolerance: ±0.005 mm on critical diameters
Lead time: 7–12 working days for prototypes
No MOQ – order one piece or one thousand
Material: A2, D2, 4140, 8620, or your specified grade
Surface finish: Ra 0.4 µm on bore and taper
We are a precision manufacturing factory in Dongguan, China, with 20 years on CNC turning, milling, and grinding lines. Your collet is not a side job. It is our core process.
Specifications
Parameter
Value
Type
Auto Lathe 46 Type collet (round bar stock)
Material options
A2 tool steel, D2, 4140, 8620, 1215, or customer-specified
Hardness
58–62 HRC (through-hardened) or 60–64 HRC case-hardened
100% dimension check on bore and taper; CMM report per batch
Lead time
7 days for 1–50 pcs, 12 days for 51–500 pcs
Country of origin
Made in China (Dongguan)
All collets are stress-relieved after rough machining, then ground in one setup. This keeps bore and taper concentric. We do not skip tempering.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Each batch gets a unique heat number and work order. Raw material certs are archived for 5 years. If you need to trace a part back to its steel melt, we can do that in minutes.
2. Inspection report per batch
You receive a dimensional report with every shipment. It lists bore diameter, taper angle, concentricity, and hardness. No extra charge. No surprises.
3. One factory for CNC + stamping + spring + heatsink
Your collet is only one part of the assembly. We also run CNC machining, metal stamping, springs, and heat sink lines under one roof. Send us the full BOM. We quote the whole package, not just the collet. That saves you freight, handling, and supplier management time.
Where these parts are used
Auto Lathe 46 Type collets are for Swiss-type and sliding headstock lathes that feed round bar stock. Typical applications:
Medical device pins and bone screws – need tight concentricity to hold bar without marks
Watch and instrument components – small diameters, high repeatability
Automotive fuel injector nozzles – bore tolerance holds bar straight during machining
Electronics connector pins – brass or stainless bar, 1–6 mm diameter
Fastener production – hex or round stock, high cycle counts
In each case, the collet grips the bar with even pressure. A poor collet means chatter, oval parts, or bar slippage. Our ground bore and taper eliminate that.
Q: What is your MOQ?
A: No MOQ. We make one piece for prototype validation, then scale to your volume. Tooling is standard for 46 Type, so setup cost is low.
Q: How do you guarantee tolerance and quality?
A: We grind the bore and taper in one clamping. Then every part is checked on a CMM with a 0.001 mm resolution. The inspection report is included in the shipment. If any dimension is out, we rework or replace at no cost.
Q: What is the lead time for a custom collet?
A: For 1–50 pieces, 7 working days. For 51–500 pieces, 12 working days. For larger orders, we confirm a schedule within 24 hours of drawing review.
Q: Can you provide material certificates?
A: Yes. We supply mill test certificates for A2, D2, 4140, or any specified grade. Certificates are traceable to the batch heat number.
Send your drawing
Email your PDF or STEP file. We review it for manufacturability and reply with a firm quote in 12 hours. Include your target tolerance, material, and quantity. We handle the rest.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is our only business. Custom CNC collet chuck, made in China, no MOQ – that is the offer. Send the drawing, get the quote.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.