Custom CNC Collet Chuck 46 Type Round Bore Auto Lathe | BQUQ
OpeningYour drawing becomes a finished CNC collet chuck, verified before shipment. We machine the 46 Type round bore spring collet to your exact dimensions. Every unit is checked against your print. N
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing becomes a finished CNC collet chuck, verified before shipment. We machine the 46 Type round bore spring collet to your exact dimensions. Every unit is checked against your print. No guesswork.
Tolerance: ±0.005 mm on bore and taper
Lead time: 15–20 working days for custom batches
No MOQ — order one piece or one thousand
Material: 65Mn, GCr15, or 20CrMnTi per your spec
Made in China, shipped from Dongguan
Specifications
We run a dedicated auto lathe line for collet chucks. The 46 Type refers to the spindle nose size — a common fit for Swiss-type and multi-spindle auto lathes. The round bore is ground after heat treatment to hold consistent clamping force.
Parameter
Value
Material options
65Mn spring steel, GCr15 bearing steel, 20CrMnTi case-hardened steel
We use CNC lathes for the outer profile, then wire EDM for the slots. Grinding is done on a jig grinder to hold the bore and taper concentric within 0.005 mm. Each chuck is serialized and stored with its inspection record for three years.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every heat lot is tracked. Hardness test reports are attached to each batch. If you need to trace a part back to its material melt, we can do it. No mixed batches, no swapped steel.
2. Inspection report per batch.
You get a dimensional report with actual measured values — not just a pass/fail stamp. Bore diameter, taper angle, slot width, hardness. All numbers are on paper. This saves your incoming QC time.
3. One factory for CNC + stamping + springs + heat sinks.
Your collet chuck is not the only part you need. We also make springs, metal stampings, and heat sinks. Send us a full assembly drawing, and we coordinate all processes under one roof. Fewer suppliers, fewer delays, one shipping point.
Where these parts are used
The 46 Type round bore spring collet chuck is a workhorse in precision manufacturing. You will find it in:
Swiss-type CNC lathes — holding bar stock from 3 mm to 46 mm for medical screws, watch pins, and connector pins.
Multi-spindle auto lathes — clamping brass, aluminum, and stainless steel for high-volume automotive components.
Secondary machining fixtures — used as a workholding device on CNC milling machines for parts that need a round bore reference.
Hydraulic and pneumatic clamping systems — retrofitted into custom chucks for valve bodies and fittings.
Instrumentation housings — where runout below 0.01 mm is required for sensor bodies and probe tips.
If your part needs a collet that grips round stock without marking it, this is the chuck to specify.
Q: What is your MOQ?
A: No MOQ. We accept a single piece for prototype validation. Production orders of 500+ pieces get a price break. Tooling cost is amortized into the unit price for small batches.
Q: How do you control tolerance and quality?
A: We grind the bore and taper after heat treatment. Each chuck is measured on a CMM and a hardness tester. The inspection report is included with shipment. If a dimension is out of spec, we replace the part at no cost.
Q: What is your lead time?
A: Standard custom collets are 15–20 working days from drawing approval. For standard 46 Type sizes with common bores, we can ship in 7–10 working days. Urgent orders are possible if your material is in stock.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw material, heat treatment reports, and a full dimensional inspection report. All documents are in English and stamped by our QC department.
Send your drawing
Email your 2D or 3D file to sc@bquq.com. We reply with a firm quote in 12 hours. Include your bore size, taper angle, material, and quantity. If you do not have a full drawing, send a sample part — we reverse-engineer it and confirm the spec before cutting metal.
WhatsApp: +86 13713157787
We respond within one business hour, 8:00–20:00 Beijing time.
Your custom CNC collet chuck, made in China, verified before shipment. No MOQ, no surprises.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.