Custom CNC Collet Chuck 52 Type Hex Bar Stock Made in China
OpeningYour drawing defines the part. We manufacture it.We machine 52-type collets for automatic lathes from hex bar stock. Every collet is made to your exact drawing and verified before shipment. No
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine 52-type collets for automatic lathes from hex bar stock. Every collet is made to your exact drawing and verified before shipment. No guesswork. No deviations.
Tolerance: ±0.005 mm on bore and hex geometry
Lead time: 7–12 working days for standard batches
No MOQ: order 1 piece or 1,000 pieces
Material: 20CrMnTi, 40Cr, or 65Mn steel
Hardness: 58–62 HRC after heat treatment
We are a precision manufacturing factory in Dongguan, China, with 20 years of experience in CNC machining, metal stamping, springs, and heat sinks. Your collet is made on Swiss-type auto lathes and CNC grinders, then inspected with CMM and air gauges.
All collets are deburred and pass a 100% fit test with a master hex bar before packing.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique heat number and work order. We record material certificates, heat treatment parameters, and final inspection results. If a problem appears in your production, we trace it back to the exact batch and operator. This is standard for us, not an extra service.
2. Inspection report per batch.
You receive a dimensional report for every batch, not just a sample. We measure bore diameter, hex width, concentricity, and hardness on each collet. The report is signed by our QC engineer and sent to you with the shipment.
3. One factory for CNC, stamping, spring, and heat sink.
Your collet is not the only part in your machine. We also make stamped components, precision springs, and heat sinks. Send us your full BOM, and we coordinate all parts under one roof. Fewer suppliers, fewer logistics issues, faster assembly for you.
Where these parts are used
52-type collets with hex bar stock are used in automatic lathes and CNC turning centers for machining hexagonal bars. Typical applications:
Fastener production: hex bolts, nuts, and cap screws where the collet holds the hex bar without slipping.
Hydraulic fittings: hex-shaped bodies for adapters, couplings, and valve cores.
Automotive components: sensor housings, fuel injector parts, and brake fittings machined from hex stock.
Electrical connectors: hex brass or steel terminals for power distribution.
Pneumatic tools: hex drive shafts and couplings for impact wrenches and air tools.
The collet’s hex bore grips the bar stock securely, preventing rotation during high-speed machining. This reduces cycle time and improves thread and hex machining accuracy.
Q: Do you have a minimum order quantity?
A: No. We accept orders from 1 piece. For prototypes, we charge a small setup fee. For production batches, the setup fee is waived. No MOQ, no hidden charges.
Q: How do you control tolerance and quality?
A: We use CNC grinders with in-process gauging. After machining, each collet is checked with an air gauge and CMM. Our tolerance is ±0.005 mm on the bore, and we provide a full inspection report per batch. If any collet fails, we replace it at no cost.
Q: What is your lead time for custom collets?
A: Prototype (1–5 pieces): 7 working days. Production (50+ pieces): 12 working days. For urgent orders, we can expedite to 5 days with a 15% rush fee. We ship via DHL, FedEx, or UPS worldwide.
Q: Can you provide material certificates and heat treatment reports?
A: Yes. We supply mill certificates for raw material, heat treatment curves, and hardness test reports. All documents are in English and included with the shipment.
Send your drawing
Send us your drawing in PDF, STEP, or IGES format. We will review the material, tolerance, and quantity, and send you a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China. Custom CNC collet chuck, made in China, with no MOQ. Your drawing is the starting point. We handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.