Custom CNC Collet Chuck Manufacturing | Precision Auto Lathe Collets
OpeningYour drawing defines the part. Our machines execute it. We make custom CNC collet chucks from 20 mm to 200 mm OD, with bore sizes from 1 mm to 50 mm. Every unit is verified before shipment—not
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our machines execute it. We make custom CNC collet chucks from 20 mm to 200 mm OD, with bore sizes from 1 mm to 50 mm. Every unit is verified before shipment—not sampled, not spot-checked. We measure critical dimensions on a CMM and record the data. If it does not match your print, it does not ship.
Tolerance: ±0.005 mm on bore and taper
Lead time: 10–15 working days for prototypes, 20–25 for production runs
No MOQ—order one piece or ten thousand
Material certs included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years of CNC machining experience. You send the drawing. We return a part that fits your spindle and holds your workpiece.
ISO 9001:2015, material mill certs, heat treatment reports
We grind the bore after heat treatment. This holds the taper angle within 0.002 mm over the full length. Slots are wire-cut, not milled, to avoid burrs and maintain edge sharpness. Each collet is serialized for traceability.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality
Every collet gets a serial number. We link it to the material heat number, heat treatment batch, and inspection records. If a part fails in your machine six months from now, we can trace it to the exact steel pour and quench cycle. No guesswork. No blame-shifting.
2. Inspection report per batch
You get a full dimensional report with every order. This includes bore diameter, taper angle, concentricity, hardness, and surface roughness. We also send photos of the CMM screen and the actual part. You do not need to re-measure our parts. You can, but you will not find a discrepancy.
3. One factory for CNC + stamping + springs + heat sinks
We run four production lines under one roof: CNC machining, metal stamping, spring winding, and heat sink fabrication. If your collet chuck assembly needs a spring-loaded pusher, a stamped retainer, or a heat-treated housing, we make it here. You deal with one engineer, one invoice, one shipping point. This cuts your supplier management time by at least 30%.
Where These Parts Are Used
Custom CNC collet chucks from our factory run in Swiss-type lathes, CNC turning centers, and automatic bar feeders. You will find them in:
Medical device manufacturing—holding small titanium and stainless parts for bone screws and surgical instruments. Our collets hold 0.01 mm tolerance on a 3 mm diameter.
Aerospace fasteners—titanium bolts and rivets require a collet that does not deform under high clamping force. We use 42CrMo with a hardened bore to resist wear.
Automotive fuel injectors—high-volume production demands collets that last 500,000 cycles without losing grip. Our case-hardened collets achieve this consistently.
Electronics connectors—brass and beryllium copper pins, 1 mm to 5 mm OD, need a collet with a smooth bore to avoid scratching the surface. We polish to Ra 0.2 µm on request.
Watchmaking and jewelry—small, delicate parts that require a gentle but secure grip. Our collets are balanced to avoid vibration at 10,000 RPM.
Q: What is your MOQ?
A: No MOQ. We make one prototype for you to test, or we run 100,000 pieces. The price per piece drops with volume, but the quality standard stays identical. We do not change processes for small orders.
Q: How do you guarantee tolerance and quality?
A: We measure 100% of critical dimensions on a CMM. The bore and taper are ground, not turned, to achieve ±0.005 mm. We send you the inspection report with the shipment. If a part is out of spec, we replace it at no cost, including shipping.
Q: What is your lead time for a custom CNC collet chuck?
A: Prototypes ship in 10–15 working days after drawing approval. Production runs of 1,000+ pieces ship in 20–25 days. We can expedite to 7 days for an urgent prototype, subject to material availability.
Q: Do you provide material certificates and heat treatment reports?
A: Yes. Every batch includes a mill certificate for the raw material and a heat treatment report showing hardness and case depth. We also provide a RoHS and REACH compliance statement if your application requires it.
Send Your Drawing
Stop comparing quotes from middlemen. Work directly with the factory. Send us your drawing, and we will return a firm quote within 12 hours. Include your material, tolerance, and quantity. We will tell you if your design can be made faster or cheaper without compromising quality.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing partner, not a broker. Your custom CNC collet chuck is made in China, but it is measured to international standards. No MOQ, no surprises, no excuses. Send the drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.