Custom CNC Collet Chuck Auto Lathe Parts | Precision Made in China
OpeningYour drawing defines the part. Our job is to hold that tolerance and prove it before shipment. We machine auto lathe collets and collet chuck components from bar stock, exactly to your print, w
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our job is to hold that tolerance and prove it before shipment. We machine auto lathe collets and collet chuck components from bar stock, exactly to your print, with a full inspection report attached to every batch.
At a glance: Tolerance ±0.005 mm on critical diameters, lead time 7–12 working days, no MOQ, and 100% dimensional verification before the box leaves Dongguan.
Material certificate, dimensional report, heat treatment report
We run the collet bore and taper in the same clamping setup. That eliminates concentricity error. For slotted collets, we use wire EDM after hardening to keep slot edges sharp and burr-free.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every lot gets a unique job number. Raw material heat number, machine operator, tool offsets, and inspection results are linked to that number. If you need to trace a part back to its steel batch, we can do it in minutes.
2. Inspection report per batch. You do not have to trust us. Each shipment includes a signed inspection sheet with actual measured values—not just a pass/fail stamp. We measure critical dimensions on a CMM and record them. You can audit the report against your own incoming QC.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck assembly may need a spring, a stamped retainer, or a heat sink for the spindle motor. We make all of them under one roof. Fewer suppliers, shorter lead times, and one responsible party for the whole assembly.
Where these parts are used
Custom CNC collet chucks and auto lathe collets are not shelf items. They are built for specific machines and specific jobs.
Swiss-type lathes for medical bone screws and dental implants—tight runout is non-negotiable.
Multi-spindle automatics for brass fittings and valve components—collets that survive high cycle counts.
High-speed turning centers for aluminum connector housings—lightweight collets with balanced geometry.
Bar feeders for CNC lathes—collets that grip hex, square, and round bar stock without marking the surface.
Replacement collets for worn chucks in automotive fuel injector production—matching the original taper angle exactly.
If your part is round, square, or hex and needs to be held firmly while spinning fast, a custom collet from our shop will do it.
Q: Is there really no MOQ?
A: Correct. We machine one prototype or a full production run. The unit price drops with quantity, but we do not force you to buy more than you need. Many buyers start with 5–10 pieces for testing, then scale up.
Q: How do you guarantee ±0.005 mm tolerance?
A: We machine the bore and taper in one setup on a temperature-controlled CNC lathe. Then we measure on a CMM with a resolution of 0.0001 mm. If a dimension is out, the part is scrapped—not reworked. You get the report with the shipment.
Q: What is the typical lead time?
A: For standard materials like 42CrMo4 or SUS303, 7–10 working days after drawing approval. If heat treatment or grinding is required, add 3–5 days. Rush orders for prototype quantities can be done in 72 hours.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a mill test certificate from the steel supplier, plus our own hardness and chemical composition verification if requested. We keep the original documents for 10 years.
Send your drawing
Send us your PDF, STEP, or IGES file. We will review the material, tolerance, and quantity, then send you a firm quote within 12 hours. No hidden costs, no vague estimates.
Our precision manufacturing team is ready for your custom CNC collet chuck project. Made in China, but with the documentation and quality control you expect from any top-tier supplier.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Send the drawing. Get the quote. We start machining.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.