Custom CNC Collet Chuck BT40 ER16 Tool Holder | Precision Made in China
OpeningYour drawing defines the part. We make it exactly to that geometry, then verify it before shipment.This is a BT40 ER16 collet chuck for CNC milling. It holds ER16 collets, fits BT40 spindles, a
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We make it exactly to that geometry, then verify it before shipment.
This is a BT40 ER16 collet chuck for CNC milling. It holds ER16 collets, fits BT40 spindles, and runs true. We machine it from your print, not from a stock catalog.
Concentricity: ≤0.005 mm TIR at nose
Taper angle: BT40 (7:24) ground to AT3
Runout with collet: ≤0.01 mm at 4× diameter
Material: 20CrMnTi or 8620, case-hardened 58–62 HRC
CMM report, runout gauge test, hardness test per batch
Batch size
1 to 5,000 pieces
Lead time
10–15 days (prototype), 20–25 days (production)
We grind the BT40 taper on a Junker or Studer cylindrical grinder. The ER16 collet pocket is precision bored and honed. Every unit is checked on a runout gauge before packing.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Each heat of material gets a unique lot number. We record hardness, grinding parameters, and final runout per batch. If you need to trace a failure, we can show you the exact process data for that serial number.
2. Inspection report per batch.
You get a CMM report, runout certificate, and material test certificate with every shipment. No extra charge. The report shows actual measured values, not just a pass/fail stamp.
3. One factory for CNC, stamping, springs, and heat sinks.
Your collet chuck is not an isolated part. If your assembly also needs a stamped cover, a compression spring, or an aluminum heat sink, we make all of them under one roof. One purchase order, one quality system, one shipping date.
Where These Parts Are Used
BT40 ER16 collet chucks are standard in vertical machining centers and CNC milling machines. Typical applications:
Die and mold shops – holding carbide end mills for finishing passes where runout directly affects surface finish.
Aerospace brackets – machining thin-wall aluminum parts where tool rigidity prevents chatter.
Automotive prototype lines – quick tool changes between drilling and reaming operations.
Medical device machining – small-diameter tools (ER16 accepts 1–10 mm shanks) for titanium implants and surgical instruments.
Job shops with mixed batches – because ER16 collets cover a wide tool diameter range with one holder.
The BT40 taper is common on 40-taper spindles from Mazak, Haas, Okuma, and DMG MORI. Our chuck works in any of those machines, provided the pull stud matches your drawbar. We can supply the pull stud as a separate part or integrated per your print.
Q: What is your MOQ?
A: No MOQ. We accept single-piece orders for prototypes. Production pricing starts at 50 pieces, but you can order one piece at prototype pricing.
Q: How do you guarantee tolerance and quality?
A: We grind the taper to AT3 and check concentricity on a runout gauge. Each batch gets a CMM report and hardness certificate. If a part fails your incoming inspection, we replace it at no cost.
Q: What is your lead time for a custom CNC collet chuck?
A: Prototype: 10–15 working days after drawing approval. Production: 20–25 working days. For urgent orders, we can expedite to 7 days for an extra fee.
Q: Can you provide material certificates?
A: Yes. We supply mill test certificates for the raw material, heat treatment reports, and final hardness test results. All documents are in English and traceable to the batch number.
Send Your Drawing
Send us your PDF or STEP file. We will review the geometry, check for manufacturability, and give you a firm quote within 12 hours. No hidden costs, no vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ and full traceability. Your drawing, our machines, verified results.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.