Custom CNC Collet Chuck ER11 | Precision Manufacturing Made in China
OpeningYour ER11 collet chuck starts as a drawing, not a stock item. We machine it to your exact dimensions, verify it on a CMM, and ship it with a report. If it doesn't match your print, you don't pa
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your ER11 collet chuck starts as a drawing, not a stock item. We machine it to your exact dimensions, verify it on a CMM, and ship it with a report. If it doesn't match your print, you don't pay.
At a glance: Runout ≤ 0.005 mm TIR, hardness 58–62 HRC, lead time 7–12 days, no MOQ.
Specifications
Parameter
Value
Material options
20CrMnTi, 40Cr, 65Mn, or customer-specified steel
Heat treatment
Carburized or induction hardened, 58–62 HRC
Surface finish
Ra 0.4 μm on taper, Ra 0.8 μm on OD
Runout (TIR)
≤ 0.005 mm at nose, ≤ 0.01 mm at 50 mm from nose
Taper accuracy
AT3 per DIN 6499 / ISO 15488
Thread form
ER11 collet nut thread, M14 x 0.75 or per drawing
Keyed slots
Broached or wire-cut, ±0.02 mm
Coating option
Black oxide, TiN, or no coating
Inspection
100% dimensional check, CMM report included
Batch size
1 piece to 10,000 pieces
Lead time
7 days for prototypes, 12 days for production
MOQ
None
Machining is done on 5-axis CNC lathes and machining centers. We hold tolerances down to ±0.005 mm where your print requires it. Each part is deburred, cleaned, and rust-protected before packing.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every heat number and batch is logged. If a material issue appears six months later, we trace it to the exact melt. You get a part number, not a guess.
2. Inspection report per batch. You receive a dimensional report with actual measured values, not just a pass/fail stamp. We measure taper angle, thread pitch, and runout on every piece. No random sampling.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck might need a spring for the collet retention or a stamped washer for the nut. We make all of it under one roof. Fewer vendors, fewer handoffs, fewer tolerance stack-ups.
Where these parts are used
ER11 collet chucks are the workhorse for small-diameter toolholding. Common applications include:
Engraving machines — holding 1–7 mm end mills and gravers
CNC routers — wood, aluminum, and plastic cutting
Automated tool changers — where repeatable clamping force matters
Medical device machining — small drills and reamers in tight spaces
Jewelry and watchmaking — precision micro-machining operations
If your machine uses ER11 collets, you need a chuck that seats the collet perfectly. A poor taper means runout, and runout means broken tools and bad finishes.
Q: What is your minimum order quantity?
A: No MOQ. We make one prototype or ten thousand production parts. Prototype pricing is slightly higher per piece, but production pricing drops at 100, 500, and 1,000 pieces.
Q: How do you guarantee tolerance and quality?
A: We inspect 100% of parts. Runout is measured on a precision spindle with a dial indicator. Taper angle is checked with a calibrated gauge. You get the CMM report with your shipment.
Q: What is your lead time?
A: 7 days for prototypes, 12 days for production batches. If you need faster, we can split the batch and ship partial quantities. Air freight is available.
Q: Can you provide material certificates?
A: Yes. We provide mill certificates for the raw material and heat treatment reports. Material grade is traceable to the original melt.
Send your drawing
Send us your PDF, STEP, or IGES file. We will review the geometry, check for manufacturability, and send a firm quote within 12 hours. No hidden costs, no surprises.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing made in China — with the paperwork to prove it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.