OpeningYour drawing becomes a finished HSK50 ER20 collet chuck. We machine it from solid steel, grind the critical surfaces, and verify the taper and runout before shipment. No surprises.Tolerance: 0.
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing becomes a finished HSK50 ER20 collet chuck. We machine it from solid steel, grind the critical surfaces, and verify the taper and runout before shipment. No surprises.
Tolerance: 0.005 mm on taper and bore concentricity
Surface finish: Ra 0.4 on taper, Ra 0.8 elsewhere
Lead time: 10–15 working days for standard batches
No MOQ: order one piece or one thousand
Material: 20CrMnTi or 8620, case-hardened to 58–62 HRC
We use 5-axis CNC mills for the complex HSK50 taper and drive slots. Cylindrical grinders finish the taper and collet seat. Every chuck is checked with a precision taper gauge and a dial indicator for runout. We do not ship parts that fail our internal QC.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every batch gets a unique job number. We record material heat numbers, machine settings, and operator IDs. If you need to trace a part back to its steel, we have the paperwork. This matters for aerospace and medical tooling.
2. Inspection report per batch.
You receive a dimensional report with every shipment. It lists taper angle, runout, hardness, and surface finish. No generic "certificate of conformance." You get actual numbers, measured on actual parts. If you need third-party inspection, we coordinate that too.
3. One factory for CNC + stamping + springs + heat sinks.
We are not a trading company. Our 5,000 m² facility runs CNC machining, metal stamping, spring coiling, and heat sink extrusion lines. You send us a drawing for a collet chuck, and we can also quote the retention knobs, springs, or coolant nozzles in the same email. Fewer suppliers, shorter lead times, one responsible party.
Where these parts are used
HSK50 ER20 collet chucks are standard in high-speed machining centers. They hold cutting tools with ER20 collets, typically for drills, end mills, and reamers up to 13 mm shank diameter.
Die and mold shops: High-speed finishing of hardened steel cavities. The short, rigid HSK50 taper reduces vibration at 15,000–20,000 rpm.
Automotive production lines: Drilling and tapping operations on aluminum and cast iron components. Quick tool changes and repeatable runout keep cycle times low.
Aerospace structural parts: Titanium and aluminum machining where tool holding stiffness directly affects surface finish and tool life.
Medical device manufacturing: Small-diameter drilling and milling on stainless steel implants. The ER20 collet system allows fast tool changes without removing the chuck from the spindle.
Prototype and job shops: One-off parts where you need a custom length, special bore, or modified flange. We machine to your drawing, not just a catalog standard.
Q: What is your MOQ?
A: No MOQ. We make one piece for sample validation or 5,000 pieces for production. The unit price drops with quantity, but we do not force you to buy more than you need.
Q: How do you guarantee tolerance and quality?
A: We grind the HSK50 taper and ER20 seat on the same setup to hold 0.005 mm TIR. Every part is checked with a taper gauge. We send a runout report with each batch. If a part fails your incoming inspection, we replace it at no cost.
Q: What is your lead time for custom CNC collet chucks?
A: Samples take 10 working days. Production runs take 15 working days after drawing approval. For urgent orders, we can expedite to 5 days for an additional fee.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw steel, heat treatment reports, and our own dimensional inspection report. All documents are traceable to the batch number.
Send your drawing
Send us your PDF or STEP file. We will review the geometry, material, and tolerances. You get a firm quote within 12 hours, including unit price, lead time, and shipping cost. No obligation, no hidden fees.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your custom CNC collet chuck, verified before shipment.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.