Metal Stamping

Micro Stamping: Real Limits for Parts Under 5 mm

Micro Stamping: Real Limits for Parts Under 5 mm

Micro stamping limits for parts under 5 mm: minimum hole, slot, bend and tolerance data from BQUQ, a Dongguan progressive-die stamping factory.

Metal Stamping2026-02-25763
Silver and Silver-Clad Contacts: Stamping for Switching Reliability

Silver and Silver-Clad Contacts: Stamping for Switching Reliability

Stamped silver and silver-clad contacts for relays and switches from BQUQ in Dongguan: clad strip, plating, contact force and switching life. Quote in 12 hours.

Metal Stamping2026-02-24540
Lead Frames: The Precision Stamping Behind Every IC Package

Lead Frames: The Precision Stamping Behind Every IC Package

Lead frame stamping explained: copper alloys, die design, plating and tolerances behind every IC package, from an ISO9001 Dongguan precision factory.

Metal Stamping2026-02-231068
Beryllium Copper Stamping: When the Cost Is Justified

Beryllium Copper Stamping: When the Cost Is Justified

Beryllium copper stamping explained by BQUQ, a Dongguan source factory: C17200 conductivity, strength, fatigue and cost vs brass and phosphor bronze.

Metal Stamping2026-02-23592
Stamping Copper and Brass: Conductive Parts Done Right

Stamping Copper and Brass: Conductive Parts Done Right

Copper, brass and phosphor bronze strip compared for stamped terminals and contacts. BQUQ stamps conductive parts in Dongguan with plating and tolerance guidance.

Metal Stamping2026-02-21628
Stamping Aluminum Sheet: Alloys, Limits and Anodizing After Stamping

Stamping Aluminum Sheet: Alloys, Limits and Anodizing After Stamping

Which aluminum alloys stamp well and which crack? BQUQ stamps aluminum sheet and brackets in Dongguan with clear alloy, bend and anodizing guidance for buyers.

Metal Stamping2026-02-20696
Stamping Stainless Steel Strip: 301, 304 and 430 for Corrosion-Resistant Parts

Stamping Stainless Steel Strip: 301, 304 and 430 for Corrosion-Resistant Parts

Compare 301, 304 and 430 stainless strip for stamped parts. BQUQ runs progressive dies in Dongguan and stamps corrosion-resistant parts with real tolerance control.

Metal Stamping2026-02-19772
Stamping Spring Steel: Clips, Latches and Parts That Must Snap

Stamping Spring Steel: Clips, Latches and Parts That Must Snap

BQUQ stamps spring steel clips and latches in Dongguan: SAE 1074/1095, stainless 301, temper choice, fatigue life and load control. Quote in 12 hours.

Metal Stamping2026-02-18785
Stamped Metal Brackets: Design, Materials and When to Choose Stamping

Stamped Metal Brackets: Design, Materials and When to Choose Stamping

Steel, aluminum and stainless brackets from BQUQ progressive dies in Dongguan: gauge, bend radii, tolerances, and when stamping beats CNC. Quote in 12 hours.

Metal Stamping2026-02-17565
Plating Stamped Contacts: Gold, Tin and Nickel Where Each Belongs

Plating Stamped Contacts: Gold, Tin and Nickel Where Each Belongs

Plating stamped electrical contacts: gold, tin, nickel and silver on contact resistance, wear, corrosion and cost, from an ISO9001 Dongguan factory.

Metal Stamping2026-02-17928
Hardware Stamping for Home Appliances: What Gets Stamped and Why

Hardware Stamping for Home Appliances: What Gets Stamped and Why

Hardware stamping for home appliances from BQUQ, an ISO9001 Dongguan source factory: brackets, hinges, clips and enclosures. Quote in 12 hours.

Metal Stamping2026-02-16525
Connector Stamping for Telecom: Dense Pins, Tight Pitch and Reliable Plating

Connector Stamping for Telecom: Dense Pins, Tight Pitch and Reliable Plating

Telecom connector stamping from BQUQ, an ISO9001 Dongguan source factory: dense pins, tight pitch from 0.3 mm, coplanarity, plating reliability. Quote in 12 hours.

Metal Stamping2026-02-13788
Stamped Parts for LED Lighting: Brackets, Clips and Heat Sink Attachments

Stamped Parts for LED Lighting: Brackets, Clips and Heat Sink Attachments

Stamped LED parts from BQUQ, an ISO9001 Dongguan source factory: brackets, clips, PCB retainers and heat sink attachments. Quote in 12 hours.

Metal Stamping2026-02-11722
Busbars for EVs and Power: Stamping vs Machining Copper

Busbars for EVs and Power: Stamping vs Machining Copper

EV and power busbars: stamped vs machined copper compared on conductivity, edge quality, tolerance and volume cost, from an ISO9001 Dongguan source factory.

Metal Stamping2026-02-112257
Stamped Parts for Relays and Switches: Contacts, Springs and Yokes

Stamped Parts for Relays and Switches: Contacts, Springs and Yokes

Stamped relay parts from BQUQ, an ISO9001 Dongguan source factory: contacts, springs, yokes, plating and die tolerances. Quote in 12 hours.

Metal Stamping2026-02-10583

Contact Us Quote
Get A Quote
We use cookie to improve your online experience. By continuing to browse this website, you agree to our use of cookie.

Cookies

Please read our Terms and Conditions and this Policy before accessing or using our Services. If you cannot agree with this Policy or the Terms and Conditions, please do not access or use our Services. If you are located in a jurisdiction outside the European Economic Area, by using our Services, you accept the Terms and Conditions and accept our privacy practices described in this Policy.
We may modify this Policy at any time, without prior notice, and changes may apply to any Personal Information we already hold about you, as well as any new Personal Information collected after the Policy is modified. If we make changes, we will notify you by revising the date at the top of this Policy. We will provide you with advanced notice if we make any material changes to how we collect, use or disclose your Personal Information that impact your rights under this Policy. If you are located in a jurisdiction other than the European Economic Area, the United Kingdom or Switzerland (collectively “European Countries”), your continued access or use of our Services after receiving the notice of changes, constitutes your acknowledgement that you accept the updated Policy. In addition, we may provide you with real time disclosures or additional information about the Personal Information handling practices of specific parts of our Services. Such notices may supplement this Policy or provide you with additional choices about how we process your Personal Information.


Cookies

Cookies are small text files stored on your device when you access most Websites on the internet or open certain emails. Among other things, Cookies allow a Website to recognize your device and remember if you've been to the Website before. Examples of information collected by Cookies include your browser type and the address of the Website from which you arrived at our Website as well as IP address and clickstream behavior (that is the pages you view and the links you click).We use the term cookie to refer to Cookies and technologies that perform a similar function to Cookies (e.g., tags, pixels, web beacons, etc.). Cookies can be read by the originating Website on each subsequent visit and by any other Website that recognizes the cookie. The Website uses Cookies in order to make the Website easier to use, to support a better user experience, including the provision of information and functionality to you, as well as to provide us with information about how the Website is used so that we can make sure it is as up to date, relevant, and error free as we can. Cookies on the Website We use Cookies to personalize your experience when you visit the Site, uniquely identify your computer for security purposes, and enable us and our third-party service providers to serve ads on our behalf across the internet.

We classify Cookies in the following categories:
 ●  Strictly Necessary Cookies
 ●  Performance Cookies
 ●  Functional Cookies
 ●  Targeting Cookies


Cookie List
A cookie is a small piece of data (text file) that a website – when visited by a user – asks your browser to store on your device in order to remember information about you, such as your language preference or login information. Those cookies are set by us and called first-party cookies. We also use third-party cookies – which are cookies from a domain different than the domain of the website you are visiting – for our advertising and marketing efforts. More specifically, we use cookies and other tracking technologies for the following purposes:

Strictly Necessary Cookies
These cookies are necessary for the website to function and cannot be switched off in our systems. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You can set your browser to block or alert you about these cookies, but some parts of the site will not then work. These cookies do not store any personally identifiable information.

Functional Cookies
These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

Performance Cookies
These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. All information these cookies collect is aggregated and therefore anonymous. If you do not allow these cookies we will not know when you have visited our site, and will not be able to monitor its performance.

Targeting Cookies
These cookies may be set through our site by our advertising partners. They may be used by those companies to build a profile of your interests and show you relevant adverts on other sites. They do not store directly personal information, but are based on uniquely identifying your browser and internet device. If you do not allow these cookies, you will experience less targeted advertising.

How To Turn Off Cookies
You can choose to restrict or block Cookies through your browser settings at any time. Please note that certain Cookies may be set as soon as you visit the Website, but you can remove them using your browser settings. However, please be aware that restricting or blocking Cookies set on the Website may impact the functionality or performance of the Website or prevent you from using certain services provided through the Website. It will also affect our ability to update the Website to cater for user preferences and improve performance. Cookies within Mobile Applications

We only use Strictly Necessary Cookies on our mobile applications. These Cookies are critical to the functionality of our applications, so if you block or delete these Cookies you may not be able to use the application. These Cookies are not shared with any other application on your mobile device. We never use the Cookies from the mobile application to store personal information about you.

If you have questions or concerns regarding any information in this Privacy Policy, please contact us by email at . You can also contact us via our customer service at our Site.