-
English
- sc@bquq.com
Ducting and bypass control how much air actually crosses your fins. BQUQ explains the design rules and quotes custom heat sinks in 12 hours.
How heat sink base thickness drives spreading resistance. BQUQ explains the optimum, the penalty of over-thick bases, and 12-hour quoting.
How to choose a thermal interface material for heat sinks — grease, pads, gap fillers and phase change. BQUQ quotes custom heat sinks in 12 hours.
A practical heat sink design checklist covering wattage, fin geometry, materials and finishes. BQUQ quotes custom heat sinks in 12 hours.
Progressive, transfer and compound dies compared: tooling cost, speed, part size and volume breakpoints. Dongguan ISO9001 stamping factory.
How small-batch CNC economics work: tooling avoidance, setup amortization, and per-part cost math for 50-500 piece runs. Source-direct from BQUQ, quote in 12 hours.
How to choose CNC tool holders by torque, runout and reach — plus what we see on parts quoted in 12 hours at BQUQ's ISO9001 Dongguan factory.
Export packaging for machined parts: foam, VCI, desiccant, crating and humidity control to protect tolerance and surface finish in ocean and air freight.
Multi-axis CNC machining explained for buyers: 3-axis vs 4 and 5-axis, when 5-axis pays, cost and tolerance impact, and how BQUQ picks the right setup.
Metal stamping process explained: coil feed, progressive die stations, tolerances and thickness. ISO9001 Dongguan factory, 12-hour quotes.
SPC and quality control in CNC production explained: CMM checks, control charts, AQL sampling and how BQUQ holds ±0.005 mm and ships inspection reports.
Documentation for machined parts: 2D drawings, material certs, inspection reports and FAI. Learn what to request and how BQUQ documents every batch shipped.
Tumble and vibratory polishing for CNC parts: media types, cycle times, edge radius and cost per part, plus how BQUQ finishes batches to a uniform edge.
What to send when ordering custom springs: load, space, ends, environment and quantity. BQUQ, a Dongguan spring factory, quotes custom springs in 12 hours.
Hard anodizing for CNC parts: coating thickness, wear resistance, alloy choice and cost. See what BQUQ can anodize and what to specify on the drawing.
